Revox Audio Server
Introduction
Revox Joy S37 Audio Server
Page 10
Unit rear panel
There are a lot of connections on the
rear panel of the Revox Audio Server,
which are described in the following.
Power supply
You will find a socket on the left hand
side where the external power supply
unit is connected.
You should only use the power supply
unit supplied by Revox. Using an
incorrect power supply unit can lead to
damage to the audio server.
Technical data
Power 8-19 V DC
Connector ID 2,5 mm
OD 5,5 mm
Inner Connector 8-19 V DC
Outer Connector GND
Current max. 8A
Recommended 12V; 5,5 A
Audio/Video/Network
Connections to picture display devices,
audio amplifier and the IT network are
made through the rear panel.
The sockets are described from left to
right:
2-way USB 2.0
Connection for 2 x USB 2.0 devices
LAN RJ45 connection
This connection allows a one gigabit
connection to a LAN network.
Status of the LEDs
ACT/Link LED
Off
– No connection
Orange
– Connected
Flashing
– Data traffic
Speed LED
Off
– 10 MBit/s
Orange
– 100 MBit/s
Green
– 1 GBit/s
VGA output
Connect your picture display device to
the S37 VGA output if it doesn't support
the HDMI Standard digital formats.
2-way USB 2.0
These yellow USB connections support
the USB 2.0 standard with a high current
for USB drives or for charging
smartphones.
Summary of Contents for Joy S37
Page 1: ...Revox Joy S37 Audio Server Page 0 4 m1 ...
Page 4: ...Revox Joy S37 Audio Server Page 3 ...
Page 17: ...Revox Audio Server Remote control Revox Joy S37 Audio Server Page 16 Remote control overview ...
Page 70: ...Revox Audio Server Gracenote Revox Joy S37 Audio Server Page 69 User manual S37 audio server ...