Revox Audio Server
Introduction
Revox Joy S37 Audio Server
Page 11
HDMI Video output
Connect the Revox Audio Server to a
picture display device through the HDMI
output. This connection supports the
HDCP protocol and is compatible with
the HDMI 1.3a standard.
Audio formats up to 24 bit/98 kHz are
supported.
Analogue audio output
You can connect an analogue stereo
audio signal to your amplifier through the
green stereo jack plug output.
The analogue audio output supports
sampling rates of 44.1 kHz / 48 kHz / 96
kHz and 192 kHz.
Microphone connection
The S37 microphone connection is not
currently supported.
Optical audio output
The digital optical output is located to
the far right hand side. Assuming that
your amplifier has a suitable audio input,
you can also connect the audio server to
your amplifier through this connection.
The digital audio output supports
sampling rates of 44.1 kHz / 48 kHz / 96
kHz and 192 kHz with a resolution of 16
bit, 20 bit and 24 bit.
Note:
With
optical
sockets,
Revox
recommends selecting a maximum of 96
kHz.
Summary of Contents for Joy S37
Page 1: ...Revox Joy S37 Audio Server Page 0 4 m1 ...
Page 4: ...Revox Joy S37 Audio Server Page 3 ...
Page 17: ...Revox Audio Server Remote control Revox Joy S37 Audio Server Page 16 Remote control overview ...
Page 70: ...Revox Audio Server Gracenote Revox Joy S37 Audio Server Page 69 User manual S37 audio server ...