Revox Audio Server
Remote control – TV programming
Revox Joy S37 Audio Server
Page 60
Automatic search
Switch your television on.
Press the
F
and
OK
buttons on the
remote control for at least 3 seconds,
until the LED flashes twice.
Enter the code 0 0 1. The green LED
flashes twice to confirm the input.
Press and hold the
Power
button until
the television switches itself off. (This
can take up to 15 minutes)
Once it has switched off, release the
Power
button immediately and press
the
OK
button, in order to save the
selected television code.
The green LED lights up every 1.5
seconds while the search is being
made.
If the
Power
button is not released in
time after the television switches off, the
television has to be switched back on
manually.
The last 5 codes can be called again
with the
navigation button. You can
return to search mode with the
navigation button.
Once the correct code has been found,
this has to be confirmed with the
OK
button.
After searching is completed, the
remote control returns to its original
status.
The remote control flashes 5 times at the
end of the list.
If no button is pressed for 10 seconds
during programming, the remote control
automatically returns to the original
mode.
Summary of Contents for Joy S37
Page 1: ...Revox Joy S37 Audio Server Page 0 4 m1 ...
Page 4: ...Revox Joy S37 Audio Server Page 3 ...
Page 17: ...Revox Audio Server Remote control Revox Joy S37 Audio Server Page 16 Remote control overview ...
Page 70: ...Revox Audio Server Gracenote Revox Joy S37 Audio Server Page 69 User manual S37 audio server ...