Revox Audio Server
Remote control – TV programming
Revox Joy S37 Audio Server
Page 61
Reading out the code
To read out an already programmed
remote control (code):
Press the
F
and
OK
buttons on the
remote control for at least 3 seconds,
until the LED flashes twice.
Enter the code 0 0 2. The green LED
flashes twice to confirm the input.
The
1
button has to be pressed to
search for the first digit in the
programmed code. The LED starts to
flash, e.g. with the code 3 5 6, it
flashes three times.
The
2
button has to be pressed to
search for the second digit in the
programmed code. The LED starts to
flash, e.g. with the code 3 5 6, it
flashes five times.
The
3
button has to be pressed to
search for the third digit in the
programmed code. The LED starts to
flash, e.g. with the code 3 5 6, it
flashes six times.
If the digit has the value 0, the LED
doesn't flash.
If no button is pressed for 10 seconds
during programming, the remote control
automatically returns to the original
mode.
Reset
Press the
F
and
OK
buttons on the
remote control for at least 3 seconds,
until the LED flashes twice.
Enter the code 0 0 0.
The green LED flashes twice to confirm
the input.
The remote control is now reset to its
original state.
The television mode now has no function
(no code is programmed).
Summary of Contents for Joy S37
Page 1: ...Revox Joy S37 Audio Server Page 0 4 m1 ...
Page 4: ...Revox Joy S37 Audio Server Page 3 ...
Page 17: ...Revox Audio Server Remote control Revox Joy S37 Audio Server Page 16 Remote control overview ...
Page 70: ...Revox Audio Server Gracenote Revox Joy S37 Audio Server Page 69 User manual S37 audio server ...