TX0106XX
2
2
1
1
Filling bean container
Connecting milk container
Operation
Lift the container lid, fill in
beans.
Tip:
max. 1 day’s supply
If necessary, confirm the
system message on the
touchscreen with .
Set a container with cooled
milk in position.
Hang in the milk suction.
Emptying the grounds drawer
Open the front door and
remove the grounds drawer.
Empty and clean the grounds
drawer.
Confirm system message
with if the grounds drawer
has been emptied. Otherwise,
press
.
Reinsert the grounds drawer
and close the front door.
Switching on/off
Open front door and set main
switch to position I. Then close
front door again.
Confirm system message with
to rinse the coffee machine.
After a short time the machine
will have finished rinsing, will
be warmed up and is ready
for use.
Note:
Before switching off, the
coffee machine must be cleaned.
Please follow the instructions in
the cleaning manual.
Cleaning the residual water tray
Fill residual water tank
Remove the drip grid.
Clean the grid and tray.
Place the drip grid back.
Remove residual tank.
Empty residual water tank.
Insert residual tank again.
Note:
Follow the information in
the cleaning manual.
Remove/insert bean container
1 Pull the locking devices
2 Remove the container
1 Set up the container
2 Push the locking devices
Emptying the grounds drawer XL
Remove the grounds drawer.
Empty and clean the grounds
drawer.
Reinsert the grounds drawer.
EN
7
6
