- 59 -
•
Illustration "mode opérateur":
Hold down the MENU key for at
least 5 seconds. Then press the
CLEANING button
5 sec
5 sec
S200 - Operating instructions
•
Illustration "mode self service":
Hold down the CLEANING key for
at least 5 seconds (the logo key
top left)
•
CST - Cleaning menu (above)
•
CSTI - Cleaning menu (below)
•
MCST - Cleaning menu (above)
•
MCSTI - Cleaning menu (below)
•
Start the cleaning
•
It is recommended to perform
the COMBI CLEANING
•
Disassemble the instant module
as described
•
Clean and dry all parts
•
Reinstall the instant module
•
Cleaning is runing
•
Please wait a moment
•
Take out the grounds drawer.
•
Empty and clean the drawer
•
Touch the screen for the next
step
•
Preparation for machines with
milk module:
•
1 liter of water, at least 40°C and
1 milk cleaning tablet
•
Place 1 coffee cleaning tablet in
the tablet slot.
•
Close the slot and touch the
screen
•
Machines with a milk module:
•
emptying and cleaning the milk
container and fill in 1 liter cold
water
•
Disassemble the drinks outlet
•
Clean all parts
•
Also use the special brush
•
Reinstall the drinks outlet
•
The cleaning is now complete
•
Confirm the message on the
touch screen
•
The final rinsing running
•
The milk rinsing is running
•
Please wait a moment
•
This message is displayed when
the cleaning process is unpre-
dictably interrupted. (eg full drip
water tray, open door, etc.)
The cleaning program
DAILY: start the cleaning program