GB-33
ENGLISH
Assembly
STEP 5
STEP 6
Assembly
1. Screw the handles (74 and 75) to the moveable frame
tubes. Use respectively two M8 screws (76) with
respectively one M8 spring disc (66), one M8 washer
(6) and one M8 nut (102).
WARNING
1. Fasten the joint coverings (84L and 84R) over the
joints with respectively one M5 screw (52).
2. Also fasten the rear covers (90 and 91) to the square
frame tube. Use three M4 screws (16) respectively.
WARNING
REX_Trainer_CX200E_12.indd GB-33
REX_Trainer_CX200E_12.indd GB-33
08.05.12 12:57
08.05.12 12:57