8
Maintenance
The rollers on the auto-feed mechanism may become dirty over
time, please wipe clean with a dry cloth to maintain maximum
product performance (see fig 10).
The auto-start infra-red sensor, located in the paper feed
entry-slot, can occasionally become covered in paper-dust
causing the shredder to run despite no paper being fed into
the machine. Switch the shredder off at the rear of the
machine and carefully clean the sensor using a cotton-swab
(see fig 11).
Self-cleaning Cutters
After emptying and replacing a full bin, the shredder will run
in forward for 4 seconds, stop for 2 seconds and then reverse
for 4 seconds to clear away any remaining paper from the
cutter mechanism. This unique ‘self-cleaning’ mechanism is
additional jam prevention technology from Rexel.
Service
We recommend these machines are serviced every 6 to 12
months by a Rexel service engineer – see back of this booklet
for the contact details of your local service centre and for
enquiries about maintenance contracts.
Credit Card Shredding
The Auto+ 750X can shred credit cards. Switch the shredder to
auto mode, then;
1
Lift up the paper loading door (see fig 5).
2
Insert the credit card into the roller as shown in fig 8. Only
shred one credit card at a time.
3
Close the paper loading door (see fig 2).
Comb Bind Removal Hooks
Note –
Use only on standard comb bind strips.
1
Open bin door.
2
Place document onto the comb bind hooks (see fig 9).
3
Pull down on the document to remove comb strip.
Rexel encourages customers to recycle shredded paper.
Please note that shredded paper cannot be recycled
if mixed with credit card shards. If recycling, please
separate shredded paper and credit cards.
Shredder Accessories
We recommend that a paper waste sack for recycling shredded
paper is used on all models.
Accessory
Part Number Box Qty
Recycling Waste Sack
1765032EU 50 sacks
Plastic Waste Sack
40060
100 sacks
Oil* Refill Bottle
1760049
8
Bin Full
The shredder will not function when the bin is full and the bin
full symbol (
) is illuminated. You should empty the bin.
• Open the door and slide out the waste sack support frame.
• Carefully remove the waste sack from the frame.
* ACCO Brands Europe accepts no liability for product performance or
safety when other types or brands of lubricants are used on any part(s)
of this machine.
