Band knife machine R750/R1000 – Instruction manual
Page
55 / 89
FPUH Rexel s.c.
ul. Radziwoja 11, 61-057 Poznań
tel.: +48 61 87 68 946
www.rexelpoland.com
Pic.5 Upper band guide adjustment
In order to perform adjustment of the lower band guide (pic.6):
•
Remove the cover of the lower guide (5).
•
Loosen the M4 screws (2) using hex key nr.3.
•
Set the 0.75 mm gap (0.45 mm band thickness 0.30 mm gap)
between guides the band knife (1).
•
Loosen the screw (4) using hex key.
•
By twisting the axis (3) set 0.50 mm gap between back bearing and
back side of the band knife (1).
•
Tighten the screw (4).
•
Recommended gap is 0.5 mm.
•
Place back the cover of the lower guide bearing (5).
