Band knife machine R750/R1000 – Instruction manual
Page
67 / 89
FPUH Rexel s.c.
ul. Radziwoja 11, 61-057 Poznań
tel.: +48 61 87 68 946
www.rexelpoland.com
9.
M
ACHINE END OF LIFE
,
DISMANTLING AND DISPOSAL
Each machine after multiple cycles wears itself at the structure level.
After use, the R750/R1000 machine does not require any special storage. If
elements of the machine may be a source of contamination, they should be
dismantled and immediately disposed of in accordance with the local
regulations.
9.1.
S
IGNS INDICATING MACHINE END OF LIFE AND NECESSITY OF ITS
DISPOSAL
In the event that it is not possible to repair the main components of the
machine, in particular when, despite repairs, further machine safe use is not
possible, one should stop working on the machine and dispose of it.
9.2.
M
ACHINE SAFE DISPOSAL
Materials used to make the machine should be recycled. The
components of the device made by sub-suppliers are subject to recycling in
accordance with the instructions of their manufacturers. The parts that make
up the R750/R1000 band knife machine are used as mixed scrap. However, it is
possible to dismantle it for sorted scrap.
The Band knife machine R750/R1000 is mainly made of the following
materials:
- powder coated, galvanized and blued steel
- aluminium
- various plastics
- rubber
- lubricants
- engineered wood (chipboard)
The electric scrap must be disposed of in accordance with the applicable
ordinances.
