DEM Page 5 of 43 FEBRUARY 07
S16
PREFACE
SERVICE PREPARATION
This manual provides the instructions for the replacement of all the components that may become worn or
damaged during normal usage of the machine.
“Illustrated Parts Lists”
-
For each machine give full details of the replacement part numbers
with
supporting diagrams to show the location of the components.
“Service Instructions”
-
For each machine give the recommended servicing procedure
with
supporting pictorial diagrams for added clarity
WARNING
1. Check the machine RATING PLATE DETAILS are compatible with the electrical mains supply.
2. Disconnect the electrical mains supply before removing any covers.
3. The machine
MUST
have a sound Electrical Earth Connection.
NOTE: THE ELECTRIC MOTOR IS PROTECTED BY AN AUTOMATIC THERMAL OVERLOAD CUT-OUT
Product Testing after Servicing or Repair.
IMPORTANT. If any electrical component has been changed, an electrical connection broken and
remade, or any wiring disturbed, the product being repaired or serviced must be flash tested or PAT
tested. This test must be carried before a product is handed back or returned to the customer or
returned to stock. The test must be appropriate for the machine being repaired. E.g. double insulated
or earthed. A competent person should conduct the test and keep a log of all machines tested, the
serial number of the machine, the details of the test, the test results and the date the test was carried
out.
PAPER SHREDDER S16 SECTION 1
ILLUSTRATED PARTS LIST
Summary of Contents for S16
Page 21: ...DEM Page 21 of 43 FEBRUARY 07 ...