Rexing P1, User Manual

21

20

IR Night Vision Mode 

Default IR night vision mode is a Manual function  
and the IR night vision indicator is off after starting the 
device. The optical filter switch uses a color filter, which 
is suitable for application at daytime. Use the optical 
filter switch to manually switch to IR night vision mode 
at night. In the power-on state, 

hold the UP key

 under 

the preview screen to enable IR mode. Now the IR light 
is ON and shows red. The image changes into a black 
and white image under the preview screen or during 
camera shooting. 

Hold the UP key

 again to turn off the 

IR mode. Now the IR light is OFF and the image restores 
color image under the preview screen or during camera 
shooting. Pressing the UP key allows you to switch 
between daytime working mode and night working mode. If 
automatic switching is desired, you may set the IR control 
to Auto in the menu. Now, the recorder may automatically 
switch to IR night vision mode according to ambient  the 
brightness of light. 

Deleting a File 

You cannot delete any video file from the memory card 
by using the device itself. To delete a video file, you must 
connect the device to a computer and delete it from the 
USB drive via the computer.

Videos and Photos Review/Playback 

In the standby mode, 

press the RETURN key

 to check 

the playback list. 

Use the UP or DOWN key

 to select a 

desired item as shown below:

Press the OK key 

to check the playback list. Use the UP 

or DOWN key to select a file to play. 

During playback, 

press the OK key

 to pause or play. 

Press the RETURN key

 to return to the previous menu. 

Videos

Photos

Audios

REXING P1 DEVICE — Video Review

R

OK