Option 2: Motion Detection
To use this feature, you need to connect it with an Intelligent Hardwire Kit (ASIN
B0973MBCT8, sold separately). Make sure that the Parking Mode is turned off on
your dash cam.
Once the sensor has detected MOTIONS. The intelligent hardwire kit will powerup
the dash cam automatically and start recording until the MOTION is cleared.
Time-lapse Recording:
Record video in one frame per second to conserve memory and reduce the time it
takes to review the video.
G-Sensor Trigger Recording:
The G-sensor detects significant or sudden movement (such as an impact or
collision), it will trigger an event recording. We suggest setting the “Gravity Sensing”
to High sensitivity for Parking Mode Recording. The dash cam will remain off until a
movement is detected.
Note
If you do not use the parking mode function, please change the G-Sensor setting to
low sensitivity. Otherwise, the dash cam will easily lock the videos and these videos
cannot be deleted by the loop recording function. This will cause the memory card
to be full of locked videos and cause the recorder to fail to work normally.
15
