GETTING ST
AR
TED
4
Mount the camera in a safe, appropriate location where it will not
obstruct the driver's view. Clean your windshield once you've chosen
a location. Peel the sticker off the back of the 3M adhesive and firmly
apply the mount to your chosen location on the windshield.
Wait at
least 20 minutes before attaching the dash cam to the mount.
Then, slide the camera into the mount until it clicks into place.
4.1
INSTALLING THE DASH CAM MOUNT
RESET
Note:
Using an incompatible card may damage the device, the
memory card, or corrupt the data stored on it.
Always use a
compatible memory card.
Always power down the device before removing the memory card.
The manufacturer's warranty does not cover any losses, including loss
of data, due to the use of a damaged or a corrupt memory card.
4.2
INSERTING A MEMORY CARD
Inserting a Memory Card
:
1. Press and hold the
POWER
button to turn the camera off.
2. Insert the card in the orientation shown.
3. Push the card into the slot.
4. Listen for a click sound that signals the card is securely inserted.
Follow these steps to
remove the memory card
from the device.
Important!
Do not remove the memory card while the device is
transferring or accessing information.
1. Press and hold the
POWER
button to turn the camera off.
2. Gently push the memory card in until you hear a click, and allow
the spring release to push the card out.
Rexing V360 accepts “High-endurance” Micro SD memory
cards (class 10 or higher) with a maximum capacity of 256GB.
Depending on the memory card manufacturer and type, some cards
may not be compatible with your device.
Using an incompatible
card may damage the device or the memory card, or corrupt
the data stored on it.
recommended cards.
USB
AV
Micro SD
9
8
