GETTING ST
AR
TED
4
2. Formatting the Memory Card
Important!
Always backup important data stored on the memory
card before formatting. For best results, format the memory card
using the Format function on the camera. The manufacturer's
warranty does not cover loss of data resulting from user actions.
Always format the memory card correctly before using the
new card. Follow these steps to format the memory card.
A. Make sure you have inserted your memory card, then turn on the
camera by connecting to a power source.
Note:
If the camera is
ON and not recording, go to Step C.
B. Press the
Video Recording
icon to stop recording.
C. Press the
Settings
icon.
D. Press the
System Settings
icon to enter the system
setup menu.
E. Press
Format
and
OK
to confirm and format the card.
2019-02-16 14:52:59
At this point, disconnect from the power source. The camera will shut
down automatically after 10 seconds.
The next time the camera is
connected to power, the camera should start up and begin
recording automatically.
13
12
5
Settings
O n
O ff
Date
Restore
Version
Mute
Sound
Language
Veegoo_Rec_V2.630 20181229_01
Low
Medium
High
English
Format
Factory
2019-06-02 14:53
Follow these steps to install the camera.
1. Insert the plastic mount piece into the open space located
on the back of the camera and slide the camera down to secure it
to the windshield.
2. Carefully route the power cable around the windscreen and tuck it
under the trim.
3. Plug the car charger cable to a 12V DC power outlet or the car
cigarette lighter.
4. Plug the charger into the Mini-USB port on the device.
Once the vehicle is started, the camera will automatically power on
and start recording.
4.4
MOUNTING THE FRONT CAMERA
