REXON RHP530, Programmer Software Manual

1.

Unpacking

This package contains following items.
• Programming Lead (See illustrated.)
• Compact Disc (Programming software or installing wizards).
• Programming Guide (this book).

1.1. System Requirements

• Windows 7 32/64 bits /Vista/XP/Me/2000/98SE/95.
• 32MB of RAM.
• 2MB of available hard disk space.
• CD –ROM Drive or internet access.

1.2. Installing Programming Software

Insert  the  compact  disc  into  CD  –ROM   drive,  installing  wizards  will 

automatically guide you to install the software.  If installation does not 

work properly, to run setup.exe from CD –ROM drive.

1.3. Arrangement To Program

Connect the RHP530 as illustrated.

(1) Hold the power on/off button to turn the RHP530 off.
(2) Pull external spk/mic rubber out. 
(3) Plug programming lead into 3.5mm earpiece.
(4) Connect  end  of  the  serial  cable  to  PC’s  serial  port  with  25  –9 

adaptor or used USB type.

(5) Hold 

PTT 

(Push-to-talk) button  and  hold the power on  button  until 

LCD shown 

  chars.

INTERFACE CABLE AND USB –232 ARE NOT SUPPLIED AS PART OF THE 
PROGRAMMING LEAD BUT ARE ADDITIONAL ACCESSORIES.

 PROGRAMMING GUIDE        V1.31                        

Page 1