Änderungen vorbehalten
4
1.0 General Inspection
When you get a new AV 2012 B Oscillator, you are suggested to take the following steps to
inspect the instrument.
1.1 Inspect the shipping carton for damage
If there are damages in the packing or foam, keep them until the whole instrument passing the
electrical and mechanical test
1.2 Inspect the instrument
In case any mechanical damage or defect, or if the instrument does not operate properly or
performance tests,
notify
your
Rexotech
sales representative:
shop@rexotech.com
The consigner or carrier shall be liable for the damage to the instrument resulting from shipment.
Rexotech would not be responsible for free maintenance/rework or replacement of the unit.
1.1 Symbols In This Manual
Symbol 1:
Attention - refer to manual
Symbol 2:
Danger – High Voltage
Symbol 3:
Protective Ground
Symbol 4:
Attention
Symbol 5:
Stop! Possible damage to the equipment
The CE mark is a registered trademark of the European Community. To meet this mark the
instrument has fulfilled the EMV / ESD standards.
This product complies with the WEEE Directive (2002/96/EC) marking equipment. The affixed
product label indicates that you must not discard this electrical /electronic product in domestic
household waste. To return unwanted products contact your Rexotech Office.
