10/76
Safety instructions
Bosch Rexroth AG
, CytroPac, RE 51055-B/02.2021
The hydraulic power unit is technical equipment exclusively intended for
professional and not for private use.
Intended use also includes having read and understood this documentation
completely, especially chapter 2 "Safety instructions" and chapter 3 "General notes
on damage to property and damage to the product".
2.3 Improper use
Any use other than described in the section “Intended use” is considered as
improper and is therefore not permitted.
Bosch Rexroth AG does not assume any liability for damage caused by improper use.
The user assumes all risks involved with improper use.
The hydraulic power unit is not suitable for operation in explosive environments.
Improper use of the hydraulic power unit includes:
▶
Non-compliance with the technical data, operating conditions, performance limits
and environmental conditions specified in the data sheet.
▶
Operation of the hydraulic power unit with hydraulic fluid not complying with the
specifications in the data sheet.
▶
Use of spare parts that are not approved by the manufacturer.
▶
Mechanical modification of the hydraulic power unit.
▶
Welding or soldering work at the hydraulic power unit.
2.4 Qualification of personnel
The activities described in this documentation require basic knowledge of
mechanics, electrics and hydraulics as well as knowledge of the appropriate
technical terms. For transporting and handling the hydraulic power unit, additional
knowledge of how to handle lifting gear and the necessary attachment devices is
required. In order to ensure safe use, these activities may only be carried out by
an expert in the respective field or an instructed person under the direction and
supervision of an expert.
Experts are those who are able to recognize potential hazards and apply the
appropriate safety measures due to their professional training, knowledge and
experience, as well as their understanding of the relevant requirements pertaining
to the work to be undertaken. An expert must observe the relevant specific
professional rules and have the necessary hydraulic and electrical expert knowledge.
Bosch Rexroth offers training courses that support your qualification in specific
fields. You can find an overview of training contents on the Internet at:
https://
www.boschrexroth.com
2.5
General safety instructions
• Observe the valid regulations on accident prevention and environmental protection.
• Observe the safety regulations and provisions of the country in which the product
is used/applied.
• Exclusively use Rexroth products in technically perfect condition.
• Observe all notices on the product.
