16/76
General notes on damage to property and damage to the product
Bosch Rexroth AG
, CytroPac, RE 51055-B/02.2021
3
General notes on damage to property
and damage to the product
The warranty only applies to the delivered configuration. The warranty becomes
void if the product is incorrectly mounted, commissioned or operated, not used
as intended and/or handled improperly.
NOTICE
Danger due to improper handling!
Damage to property!
▶
You may only use the hydraulic power unit according to section 2.2 "Intended
use".
▶
Do not expose the hydraulic power unit to any mechanical loads under any
circumstances.
▶
Do not place/put any objects on top of the hydraulic power unit.
▶
Never use the hydraulic power unit as a handle or step.
▶
Do not apply any external loads on the hydraulic power unit.
Unauthorized changes to the frequency converter parameters!
Damage to property!
▶
Parameters may only be changed in accordance with commissioning instructions
RE 51055-IB.
▶
Coordinate any changes of other parameters with the Bosch Rexroth customer
service.
Operation with lack of hydraulic fluid!
Damage to property!
▶
When commissioning or re-commissioning a machine or system, make certain
that the oil tank as well as the suction and working lines of the hydraulic power
unit and the components are filled with hydraulic fluid and remain filled during
operation.
▶
Observe the machine/system manufacturer's specifications regarding the point
“Check of the hydraulic fluid" and the prescribed remedial measures for the
check result.
Leaking or spilled hydraulic fluid!
Environmental pollution and pollution of the ground water!
▶
Use an oil binding agent in order to bind spilled hydraulic fluid.
▶
When filling and draining the hydraulic fluid, always put a collecting pan under
the hydraulic power unit.
▶
Observe the information in the safety data sheet for the hydraulic fluid and the
instructions provided by the system manufacturer.
