26/76
Transport and storage
Bosch Rexroth AG
, CytroPac, RE 51055-B/02.2021
6.1.3 Transport using lifting gear
For transport, the hydraulic power unit can be connected to lifting gear.
For lifting and transport of the hydraulic power unit, proceed as follows:
1.
Make sure that the lifting gear's lifting capacity is sufficiently dimensioned in
order to safely bear the weight of the hydraulic power unit.
2.
Use the eyebolt, which is mounted to the hydraulic power unit and provided for
lifting, see fig. 5.
3.
Make sure that the eyebolt is securely tightened.
4.
Make sure that the cover is turned to the closed position during transport. See
fig. 5.
5.
Attach suitable lifting gear to the eyebolt.
6.
Attach the lifting gear to a crane hook.
7.
Slowly and carefully lift the hydraulic power unit in order to avoid swinging.
Fig. 5: Eyebolt
