and it can cause harmful interferences of the wireless communication if it is not
installed and used as specified in the operating instructions. Harmful
interferences can result if this device is operated on a residential area. In this
case, the user has to eliminate the interferences at his own expense.
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
●
This device may not cause harmful interferences.
●
This device has to tolerate any receiving interferences, including interferences
that can cause undesired operation.
8.3 CE marking
8.3.1 Declaration of conformity
The electronic products described in these instructions comply with the
requirements and the target of the following EU directive and the following
harmonized European standards:
EMC directive 2014/30/EU
The electronic products described in the present instructions are intended for
use in industrial environments and comply with the following requirements:
Standard
Title
DIN EN 61000-6-2
Electromagnetic compatibility (EMC)
Part 6-2: Generic standards – Immunity for
industrial environments
DIN EN 61000-6-4
Electromagnetic compatibility (EMC)
Part 6-4: Generic standards – Emission standard
for industrial environments
Tab. 8-2: Standards for electromagnetic compatibility (EMC)
Loss of CE conformity due to modifications at the device
CE marking applies only to the device upon delivery. After modifying
the device, verify the CE conformity.
8.4 UL/CSA certified
The devices are certified acc. to
●
UL 61010-2-201 (Industrial Control Equipment) and
●
CSA22.2 No. 61010-2-201 (CSA)
UL file no. E210730.
However, there can be combinations or extension stages with a limited or
missing certification. Thus, verify the registration according to the UL marking
on the device.
12/53
Standards
IndraControl PR31 and VR31 Control
cabinet PC and panel PC
Bosch Rexroth AG R911397433_Edition 02
