10.10 Mounting cut-out
2
1
①
Mounting cut-out
Fig. 10-20: Mounting cut-out
Display size
Width
①
Height
②
10"
275.00 mm, tolerance ±0.7
194.00 mm, tolerance ±0.4
12"
308.50 mm, tolerance ±0.7
219.50 mm, tolerance ±0.4
15"
412.40 mm, tolerance ±0.7
261.70 mm, tolerance ±0.4
21"
550.30 mm, tolerance ±0.7
341.80 mm, tolerance ±0.4
Tab. 10-3: Mounting cut-out in millimeters
Ensure the IP protection class:
●
Observe the tolerance specifications for the mounting cut-out!
●
Observe the wall thickness for the mounting cut-out! Minimum of
2 mm and maximum of 6 mm.
●
Consider the weight of the display and of the PC. Especially if
there is a strong vibration. Reinforce the front plate with slates at
the internal side close of the mounting cut-out if required.
34/53
Mounting, demounting and electric installation
IndraControl PR31 and VR31 Control
cabinet PC and panel PC
Bosch Rexroth AG R911397433_Edition 02
