Fig. 9-4: USB interfaces
The maximum current carrying capacity per USB socket is 500 mA
for the USB2.0 and 900mA for the USB3.0.
9.4 Ethernet interfaces XETH1 and XETH2
The control cabinet PC can be connected to an Ethernet network via the
Ethernet interfaces XETH1 and XETH2.
Fig. 9-5: Ethernet interfaces
9.5 DisplayPort XDP
At the display port (XDP), an operating display DR or a monitor can be
connected to the display port interface. An active converter is required to
connect a DVI or HDMI monitor, as the internal graphics card does not provide
any automatic detection and switching between DVI-HDMI protocol and display
port protocol. No image is shown if a passive adapter is used.
Fig. 9-6: Display port interfaces
16/53
Interfaces
IndraControl PR31 and VR31 Control
cabinet PC and panel PC
Bosch Rexroth AG R911397433_Edition 02
