1.5
Combinations of Rexroth IndraDrive C with
Rexroth IndraDrive M and Rexroth IndraDrive Mi
On the common Rexroth IndraDrive platform, it is possible to combine the
components of the product ranges Rexroth IndraDrive C, Rexroth
IndraDrive M and Rexroth IndraDrive Mi to form drive systems of optimum
costs and performance.
To supply the components of the product range Rexroth IndraDrive Mi (KCU
with KSM/KMS), you can use:
●
Modular HMV01 and HMV02 supply units
●
HCS02 and HCS03 converters
Allowed combinations of components: See
chapter 8 "Configuring the Drive
1.6
Basic Design of the Devices
1.6.1
General Information
1
Power section
2
Control section
Fig.1-11:
Basic Design of a Drive Controller
A drive controller consists of two essential parts:
●
Power section
●
Control section
1.6.2
Power Section
The power section incorporates the control section and has the following con‐
nections:
●
Mains voltage connection (at HCS devices)
Bosch Rexroth AG
DOK-INDRV*-SYSTEM*****-PR06-EN-P
Rexroth IndraDrive Drive Systems with HMV01/02 HMS01/02, HMD01, HCS02/03
24/309
System Presentation
