To ensure application-specific use of Drive controllers, device types of differ‐
ent drive power and different interfaces are available.
Typical applications include, for example:
●
Handling and mounting systems,
●
Packaging and food machines,
●
Printing and paper processing machines and
●
Machine tools.
Drive controllers may only be operated under the assembly and installation
conditions described in this documentation, in the specified position of normal
use and under the ambient conditions as described (temperature, degree of
protection, humidity, EMC, etc.).
2.2
Inappropriate Use
Using the Drive controllers outside of the operating conditions described in
this documentation and outside of the technical data and specifications given
is defined as "inappropriate use".
Drive controllers may not be used, if ...
●
they are subject to operating conditions that do not meet the specified
ambient conditions. This includes, for example, operation under water,
under extreme temperature fluctuations or extremely high maximum
temperatures.
●
Furthermore, Drive controllers may not be used in applications which
have not been expressly authorized by Rexroth. Please carefully follow
the specifications outlined in the general Safety Instructions!
Components of the Rexroth IndraDrive system are products of
category C3 (with limited availability) according to IEC 61800‑3.
To ensure that this category (limit values) is maintained, suitable
line filters must be used in the drive system.
These components are not provided for use in a public low-volt‐
age network supplying residential areas with power. If these com‐
ponents are used in such a public network, high-frequency inter‐
ference is to be expected. This can require additional measures
of radio interference suppression.
Bosch Rexroth AG
DOK-INDRV*-SYSTEM*****-PR06-EN-P
Rexroth IndraDrive Drive Systems with HMV01/02 HMS01/02, HMD01, HCS02/03
36/309
Important Directions for Use
