CCC (China Compulsory Certifica‐
tion)
The CCC test symbol comprises a compulsory certification of safety and
quality for certain products mentioned in the product catalog "First Catalogue
of Products Subject to Compulsory Certification" and in the CNCA document
"Application Scope for Compulsory Certification of Products acc. first Cata‐
logue" and put in circulation in China. This compulsory certification has been
existing since 2003.
CNCA is the Chinese authority responsible for certification directives. When a
product is imported in China, the certification will be checked at the customs
by means of entries in a database. For the requirement of certification three
criteria are normally relevant:
1.
Customs tariff number (HS code) according to CNCA document "Appli‐
cation Scope for Compulsory Certification of Products acc. first Cata‐
logue".
2.
Scope of application according to CNCA document "Application Scope
for Compulsory Certification of Products acc. first Catalogue".
3.
For the IEC product standard used, the corresponding Chinese GB
standard must exist.
For the drive components by Rexroth described in this documentation, certifi‐
cation is not required at present, thus they are not CCC certified. Negative
certifications will not be issued.
5.2
Transport and Storage
5.2.1
Transport of the Components
Ambient and Operating Conditions - Transport
Description
Symbol
Unit
Value
Temperature range
T
a_tran
°C
Supply units and drive con‐
trollers:
KCU:
-25 … +70
Motors:
KSM, KMS:
-20 … +80
Relative humidity
%
5 … 95
Absolute humidity
g/m
3
1 … 60
Climatic category (IEC 721)
2K3
Moisture condensation
Not allowed
Icing
Not allowed
Tab.5-4:
Ambient and Operating Conditions - Transport
DOK-INDRV*-SYSTEM*****-PR06-EN-P
Rexroth IndraDrive Drive Systems with HMV01/02 HMS01/02, HMD01, HCS02/03
Bosch Rexroth AG
57/309
General Data and Specifications