3.
Install a 2x4 block on the opposite side wall and secure the truss.
Step 9
Install Siding on Front Wall
1.
Select a 12-1/2" siding panel with a 'Tongue' edge and install at the front left corner. Cut edge
will be flush with side wall siding. Install a 15-3/4" siding panel with a 'LAP' edge next. Cut
edge should be flush with door opening.
2.
Install (2) two 4-3/4" x 32-1/4" siding panels over the door opening. Bottom of siding should
be flush with door opening. Trim will cover where the siding panels butt together in the center.
3.
Install the 16-1/2" panel
with the 'cut' edge flush
with the door opening.
4.
Install last siding panel.
Cut Edge
Cut Edge
Cut Edge
12-1/2" Siding with 'Tongue' edge
Step 10
Install Roof Gable
Install 2x4 Block
15-3/4" Siding with 'LAP' edge
1.
Select a truss with a gusset installed on one side. Position this truss with
the gusset facing towards the inside of the building and flush with 2x4s
on back wall.
2.
Install a 10" to 12" long 2x4 block on a side wall using 10d sinkers.
Secure the truss to the 2x4 block with (2) two 10 sinkers.
