STEP 1 Insert the Base Panel
Insert the Base Panel
Lock.
Incorrect fit.
Correct fit.
When inserting the Base Panel, make sure it fits correctly between the sliding rails
premolded in the interior of Top Cover.
When locking the Base Panel, push on the both side-locks simultaneously. Alternatively, you can push on the middle part of the
Base Panel surrounding the Bottom Cover Lock. Do not push the Base Panel in the area of ports!
Correct setup.
Make sure you direct antenna to the front of the StationBox Mikro.
Make sure you direct antenna to the front of the StationBox Mikro.
Insert the Base Panel to the Top Cover and push it. You should hear loud „click!“ sound.
Wrong setup.
Correct push.
Correct push.
Incorrect Push.
Quick Installation Guide
StationBox® Mikro
www.rfelements.com
3 How To Close the StationBox® Mikro
Make sure you connected all cables
and opened enough premolded
positions in the Bottom Cover to lead
cables from the closed device. Make
sure the Bottom Cover is sliding in the
premolded rails.
STEP 2 Close the Bottom Cover
Correct fit – Bottom Cover.
Slide the bottom cover to the Top
cover.
Bottom Cover cable positions
Correct Push.
Bottom Cover Locked.
®
