RF-DG-32A
Shenzhen RF-star Technology Co., Ltd.
Page 6 of 19
2.
As shown below, select USBPcap and install it:
3.
The remaining steps just need to be allowed and accepted until the installation is complete, and then restart the
computer.
3.2 Configure Wireshark Environment
1.
Open Wireshark -> help -> about Wireshark -> folder -> double-click to open Extcap path, as shown in the figure
below:
2.
Unzip the zip file and copy the four files in the extcap folder to the Wireshark extcap path just opened. The following
