RF-WM-3200B1
Shenzhen RF-star Technology Co., Ltd.
Page 17 of 35
6 OFDM
TX power level = 0
248
mA
TX power level = 4
179
mA
54 OFDM
TX power level = 0
223
mA
TX power level = 4
160
mA
RX
1 DSSS
53
mA
54 OFDM
53
mA
NWP LPDX
(4)
0.25
mA
NWP idle connected
(3)
0.825
mA
MCU Hibernate
(5)
MCU hibernate
(6)
4
µA
Peak Calibration Current
(7)
V
BAT
= 3.3 V
450
mA
Notes
：
(1) TX power level = 0 implies maximum power. TX power level = 4 implies output power backed off approximately 4
dB.
(2) The CC3200 system is a constant power-source system. The active current numbers scale based on the VBAT
voltage supplied.
(3) DTIM = 1
(4) LPDS current does not include the external serial flash. The LPDS number reported is with retention of 64 KB MCU
SRAM. The CC3200 device can be configured to retain 0 KB, 64 KB, 128 KB, 192 KB or 256 KB SRAM in LPDS. Each
64KB retained increases LPDS current
by 4 μA.
(5) Serial flash current consumption in power-down mode during hibernate is not included.
(6) The complete calibration can take up to 17 mJ of energy from the battery over a time of 24 ms. Calibration is
performed sparingly, typically when coming out of Hibernate and only if temperature has changed by more than 20°C or
the time elapsed from prior calibration is greater than 24 hours.
