18
Installation
Installation into vertical shaft TECNIVER with built-in mounting frame
The product was tested and approved in:
Product
Range
Wall type
Classification
Kamouflage 60 MP
350x385 mm ≤ Kamouflage 1V MP ≤ 700x1075 mm Shaft
Tecniver ≥ 35 mm
EI 60 (v
ed
i
n
o) S 1500 C10000 AA multi
Kamouflage 120 MP
350x385 mm ≤ Kamouflage 1V MP ≤ 700x1075 mm Shaft
Tecniver ≥ 45 mm
EI 90 (v
ed
i
n
o) S 1500 C10000 AA multi
Kamouflage 120 MP
350x385 mm ≤ Kamouflage 1V MP ≤ 700x1075 mm Shaft
Tecniver ≥ 50 mm
EI 120 (v
ed
i
n
o) S 1500 C10000 AA multi
e
≥ 125 mm
KAMOUFLAGE MP
EASY-KAP ME/MP
e
A = 2 x e + 20 mm
(W+
A
) x (H+
A
) mm
(W+
20) x (H+
20) mm
1. Put glue type CF GLUE on the uprights and cross pieces
and between the lining and the wall. Screw the sleeve using
chipboard screws Ø5 x 70mm at 150 mm intervals.
Two fixing lugs are provided at the bottom and at the top of
the mounting frame: fold these against the sleeve. First coat the
opening with glue CF GLUE. Glue the mounting frame to the
lining taking care not to misshape it. The finished opening must
have the same size as the mounting frame (W+10) x (H+10) mm.
Installation into vertical shaft TECNIVER (without a mounting frame)
The product was tested and approved in:
Product
Range
Wall type
Classification
Kamouflage 60 MP
350x385 mm ≤ Kamouflage 1V MP ≤ 700x1075 mm Shaft
Tecniver ≥ 35 mm
EI 60 (v
ed
i
n
o) S 1500 C10000 AA multi
Kamouflage 120 MP
350x385 mm ≤ Kamouflage 1V MP ≤ 700x1075 mm Shaft
Tecniver ≥ 45 mm
EI 90 (v
ed
i
n
o) S 1500 C10000 AA multi
Kamouflage 120 MP
350x385 mm ≤ Kamouflage 1V MP ≤ 700x1075 mm Shaft
Tecniver ≥ 50 mm
EI 120 (v
ed
i
n
o) S 1500 C10000 AA multi
KAMOUFLAGE MP
e
≥ 125 mm
e
A = 2 x e + 10 mm
(W+
A
) x (H+
A
) mm
(W+10) x (H+10) mm
1. Put glue type CF GLUE on the uprights and cross pieces
and between the lining and the wall. Screw the sleeve using
chipboard screws Ø5 x 70mm at 150 mm intervals.
1
1
