22
Installation
Installation at minimal distances
40%
1. The shutters can be installed at minimal distance on top of
or next to each other, if they are mounted in seperate sleeves
made from the shaft material with the required fire resistance.
It is advised not to exceed a 4 x 2 configuration (W x H).
40%
A=10mm (KAM ME/MP)
A=20mm (KAM ME/MP + EASY KAP ME/MP)
125
Wn+A
Hn+A
2. In case several shutters are mounted at a minimal distance,
the bearing and reinforcement points of the shaft must be
adjusted in proportion to the increased weight. The installation
of the shaft must comply with the classification report
delivered by the shaft manufacturer.
40%
3. When mounting in a concrete shaft, you need to provide a
continuous reinforcement in the vertical columns of at least
4 x Ø 8 mm.
40%
A-A’
100
≥90
≥100
100
90’
120’
A=10 mm (KAM ME/MP)
A=20 mm (KAM ME/MP + EASY KAP ME/MP)
A’
A
Wn+A
Hn+A
Finishing
1
2
1. The ATOUT RAL9010 option facilitates the finishing of the
shutter. You can remove the front plate by unscrewing the bolts
at the bottom and top on the hinge side. Then you can slide the
plate in the direction of the hinges.
1
2
3
4
1
