5
Product presentation KAMOUFLAGE MP
Product presentation KAMOUFLAGE MP
The Kamouflage MP is a motorised, aesthetic and CE marked smoke control shutter that can be perfectly integrated in many smoke
control systemss. It is certified in accordance with EN12101-8, suitable for vertical mounting in ducts or concrete shafts. Offering 60
or 120 minute fire resistance at minimum pressure loss, it is classified as suitable for multi-compartment applications. In addition,
Kamouflage MP has a C
10000
cycling classification, which means it can be used in combined smoke control and environmental,
energy saving systems.
It opens to supply and release air or to evacuate smoke in emergency situations whilst maintaining its fire resistant integrity in
standby position.
The Kamouflage MP is designed for use in:
- Pressure Differential Systems (PDS): e.g. pressurising staircases.
- Smoke and Heat Exhaust Ventilation Systems (SHEVS): ventilating protected lobbies and corridors through shafts, either naturally
or mechanically, or a combination of both.
- Energy saving systems combined with PDS or SHEVS: e.g. night cooling systems.
Smoke evacuation shutters and dampers are suitable for use in ventilating protected lobbies, venting to shafts either naturally or
mechanically. They open to evacuate smoke in emergency situations whilst maintaining fire resistant integrity in standby position.
5
optimal smoke control system thanks to higher free air passage and minimal pressure loss
5
easy to install thanks to optional mounting frame (EASY KAP ME/MP or EASY KGC ME/MP) and its light weight
5
easy to finish thanks to removable front plate
5
aesthetic solution that can be integrated in any interior design
5
simple operating tests through remote opening and resetting by an actuator
5
fully integrable in the wall finish
5
installation at minimal distances
∎
tested according to EN 1366-10
∎
compliant with EN 12101-8
∎
fit for use as air release and air supply vent in PDS-systems according to EN 12101-6
∎
suited as air supply and smoke evacuation vent in SHEVS-systems according to EN 12101-8
∎
light weight: ≤ 35 kg
∎
available with ready-to-install finish (white lacquered RAL 9010)
∎
approved for installation in calcium-silicate, ‘Staff’, Tecniver, Glasroc, Extha and concrete shafts.
∎
maintenance-free
∎
superior air tightness (tested at 1500 Pa)
1. 1 shutter
2. aluminium frame
3. lock + key
4. connection compartement
5. actuating arm
6. resetting motor
7. product identification
3
1
5
6
4
7
2
