AS
Mxxxx Series User’s Manual
Asia Pacific | EMEA | Americas
112
Ethernet
DHCP:
If enabled, the unit will attempt to get its IP Address, Subnet Mask and Gateway settings from a DHCP server. If no DHCP
server is found, the configured settings will be used. If not enabled, the configured settings will always be used.
IP Address:
The IP address for this unit.
Subnet Mask:
The network address mask to be used.
Gateway:
The address of the network gateway to be used.
Port 23 Command Line Interface:
Selects if Port 23 is enabled or disabled for Command Line Interface use. The default set
ting is ‘disabled’ for optimum security.
Email
Summary system status messages:
Selects if
System summary status messages
are to be sent via email.
Detailed channel status messages:
Selects if
Detailed channel status messages
are to be sent by email.
SMTP Server IP Address:
Sets the IP address that email messages will be sent to. This must be the IP address of the email server that will send the
email. DNS look-up is not supported, so the email server name (i.e.
“smtp.live.com”) is not a valid entry.
SMTP Server Listening Port:
Sets the port number used by the SMTP server. Commonly this will be Port 25, 2525 or 587. The IP connection to the ASM
must support access to the required IP Port. Email service providers can provide their email server Listening Port address if it is
not already known.
SMTP Server Login Username:
When the email service being used to handle emails required login authentication, enter the account Username in this field. The
entry should be the same as would otherwise be used if logging into that email service directly (i.e.
“scott@gmail.com” for
Gmail™ or “rfiASMalarms” for Jango™).
SMTP Server Login Password:
When the email service being used to handle emails required login authentication, enter the account Password in this field. The
entry should be the same as would otherwise be used if logging into that email service directly (i.e. “scott123!” for Gmail™ or
“rfiASMalarms” for Jango™). Ticking the
Reveal
box will display the password entered.
From Email Address:
Sets the email address that this unit will appear as in email messages. This must be a name in a valid email address format
(i.e. xxxx@yyyyy.com etc).
Destination Email Address(es):
Sets the email address(es) that this unit will send email messages to. (up to 4 addresses may be used)
