rfi.com.au
2
INS-42276-1
3
Solar Panel Size
SMP-5-10W
SMP-20-30W
SMP-40-50W
250 x 185 x 25mm
Region A, B, C & D
n/a
n/a
335 x 235 x 25mm
Region A, B, C & D
n/a
n/a
430 x 345 x 25mm
n/a
Region A, B, C & D
n/a
605 x 345 x 25mm
n/a
Region A, B, C & D
n/a
550 x 505 x 25mm
n/a
n/a
Region A, B, C & D
650 x 505 x 25mm
n/a
n/a
Region A & B
WIND LOADS
The Solarwatt solar panel pole mount kit has been assessed and rated to be in compliance with
AS/NZS1170.2.2011 on Wind Actions as follows:
NB: The Wind Region has nothing to do with surrounding topography or buildings.
•
Most of Australia is designated Region A which indicates a Region. Ultimate Basic Wind
Velocity of 45msec.
•
Some areas are designated Region B (57m/sec). Local authorities will advise if this applies
in your area.
•
Region C areas (66m/sec) are generally referred to as cyclonic and are generally limited to
northern coastal areas. Most Region C zones end 100km inland.
•
Region D (80m/sec) Australia’s worst Cyclonic Region between Carnarvon and Pardoo in
Western Australia.
AS/NZS1170.2.2011 provides guidance on determining the wind pressures applicable to your
Solarwatt installation site, taking in local terrain and topography. Sufficient guidance is given in
this document, but you may wish to procure a copy of these standards if your company installs
Australia wide.
Any attempt by an unqualified person to install this product could result in death or serious injury.
HANDLING
The materials used in the Solarwatt frame can have sharp corners or edges. Wear personal pro-
tective equipment such as safety glasses, hearing protection and gloves during handling.
* Installed at a maximum height of 5 metres.
* Installed at a maximum height of 5 metres.
