Pg 6 of 26
o
Type in
admin
for user name.
o
Type in
admin
for the password
o
Click on
Log In
Note: If you have changed the default user name and password of the AP, make sure you
enter the correct user name and password.
Once the login is successful, you’ll see a configuration menu and a pop up window for
wizard setup. The wizard is a quick guide to run you through the configuration
process so as to setup your system in the shortest time. After the initial setup, you
may wish to turn off the setup wizard by removing the tick on
Run This Wizard At
Start
. Click on
Next
to proceed with the setup wizard.
Note: If you have pop-ups blocker installed on your computer, it may prevent the Wizard
window from functioning properly.
