Page 4 of 6
Alligator Clip Wire
Carry Case
SLA Battery
AA Battery
1 pcs, optional
1 pcs, optional
1 or 2 pcs, optional
10 pcs, optional
1.
Charger is for inner AA rechargeable batteries.
2.
Alligator Clip Wire is for external batteries connection. Red is for anode, black is for cathode.
3.
AA batteries can be either rechargeable or other type, both work the same.
4.
Carry case is with ability to contain all components except SLA batteries.
5.
There is enclosure inside receiver to have 10x AA battery put into.
B. How system works in Two Firing Modes
Only after transmitters are learned by a receiver, they will work together.
1) How Transmitter A works with receiver in Instant Firing mode
There are 4 banks A, B, C & D and 8 cues 1, 2, 3, … , 8 for each bank in the receiver, also there are 4
buttons A, B, C & D and 8 buttons 1, 2, 3, … , 8 in the transmitter. So they work like this:
Press Button A, Bank A stands by, press Button 1, Cue 1 of Bank A is activated; press Button 2, Cue 2 of
Bank A is activated;etc., the same with other numeral buttons.
Press Button B, Bank B stands by, press Button 1, Cue 1 of Bank B is activated; press Button 2, Cue 2 of
Bank B is activated;etc., the same with other numeral buttons.
The same is with Bank C and D.
Note: When transmitter A is used, only when letter buttons are pressed, numeral buttons will work.
2) How Transmitter B works with receiver in Firing-In-Sequence mode
