Testing and Care
Wander Management Transmitters User Guide
Page 19 of 28
0510-1122-J
expired. If the warranty period has
expired, discard and replace the
transmitter immediately.
4. Your facility must keep records of test
and transmitter inspection.
Transmitter
Cleaning
and Care
This section provides detailed information
about cleaning and caring for a transmitter.
For an up-to-date list of approved cleaning
solutions, visit:
www.rft.com/Resources/Manuals & Specs/
Transmitters/Transmitter Approved Cleaning
Solutions
CAUTION
: Use of non-approved cleaners
on transmitters can cause permanent
damage to the transmitter and will void any
and all warranties.
To clean a transmitter after use:
1. Remove the banding material from the
transmitter and dispose of it.
2. Disinfect the transmitter by wiping it with
an approved cleaner.
CAUTION
: Using an approved cleaner does
not confirm the suitability of the cleaner to
meet your infection control standard; it only
indicates that the transmitter will not be
harmed by the cleaner.
The transmitters may be sprayed or rinsed
with water or the approved cleaners during
cleaning, but must not be soaked. Soaking
transmitters may result in equipment and/or
system failure.
Summary of Contents for Code Alert Wander Management
Page 1: ...Wander Management Transmitters User Guide ...
Page 31: ......
