Copyright, RFXCOM 2021
RFXtrxLAN Rev. 2.0
page 11 / 14
9. Configure the transceiver
The transceiver can be tested and configured with the RFXmngr program.
Set the IP address of the RFXtrxLAN or use the Host Name.
Connect port 10001:
Select the protocols necessary for receive and click Set Mode followed by Save Settings.
No need to select protocols for transmit!
Note that you can only select 1 protocol for receive in the RFXtrx868XL because each protocol uses
different frequencies and modulation!!!
RFXtrx433XL settings:
RFXtrx868XL settings:
