DTR_301-E3-XX-001_EN_a
3
1
Manufacturer
RGB Technology Sp. z o. o.
Karola Mytnika 28
75-129 Koszalin
POLAND
2
Specifications
ZBS10-L PoE
Dimensions of the device (WxHxD):
486mm x 170mm x 44mm / 19.1in x 6.7in x 1.7in
Display format:
HH:MM:SS
Digit height:
101,6mm / 4in
Weight of the device:
2.4kg / 5.3lbs
Casing tightness rating
1
IP:
4X
Power supply:
IEEE 802.3af(PoE), IEEE 802.3at (PoE+)
Device operation temperature (ambient):
-25°C ÷ 45°C / -13°F ÷ 113°F
Device operation temperature (device surface)
-25°C ÷ 60°C / -13°F ÷ 140°F
3
Transport and storage
Care should be taken to properly protect the devices so as to eliminate any damage during transport. It is forbidden to
transport the devices in a collective package without adequate amortisation - each device must be packed
separately and cannot have freedom of movement during transportation.
Due to the protective packing the module should be stored in the temperature not lower than -25°C and not
higher than +60°C at the humidity below 99%RH.
4
Device construction
ZBS10-L PoE is cased in a powder-coated steel housing. The properly installed device meets the IP4X tightness
requirements.
The figure shows ZBS10-L PoE clock
2
.
det. A
- case;
det. B
- AM/PM indicator;
det. C
- synchronization error indicator;
det. D
- lighting sensor;
det. E
- lR sensor;
det. F
- cable outlet;
det. G
- Ethernet connector
fig. 1
1
Specified on the basis of EN 60529.
2
Explanatory figure.
