4
DTR_301-E3-XX-001_EN_a
4.1
Dimensions of the ZBS10-L PoE device
All the dimensions shown in the drawings are given in [mm].
fig. 2
4.1.1
Mounting the ZBS10-L PoE device
fig. 3
5
Installation of the device
Proper installation consists in mounting the device in one of ways proposed by Producer. Only the correct
installation of the device ensures its proper operation and maintaining the device parameters. The housing, due
to its construction, does not protect the device against water ingress and water impact. Therefore, avoid placing
it the areas where there is a risk of flooding.
NOTICE!
Before any installation or maintenance operations refer to the manual supplied by the manufacturer. Improper
connection to the mains power supply, incautious device installation, or improper use may cause the property
damage, loss of health or death from electrical shock! In addition, any failure to follow the manufacturer's
instructions may void your warranty.
NOTICE!
It is forbidden to make any additional mounting points or any holes in the device assembly components.
In standard way the device is mounted on flat surface using the factory mounting holes on the back of the
device.
