background image

  Product Features

The RGBlue Underwater Lighting System is a light source based 
on a new concept specialized for underwater photography.

• Modulation system

1. The light source (Light Module) and power source (Battery 

Module) can be connected and disconnected easily thanks 
to an original bayonet construction.

2. Single module can be purchased additionally according to 

the usage of the system.

• Backup waterproofing mechanism

Each module is given an independent waterproofing structure

*1 

to eliminate the risk of water penetration during setting.

*1

Each module is provided with an IPX6-equivalent 

waterproofing mechanism withstanding a water depth of 100 
meters during lighting (i.e. when the modules are connected). 
However, remember that the modules cannot be connected 
or disconnected under water.

* IPX6 is a liquid ingress protection standard with which water 

projected in jets from any direction shall have no harmful effects.

• Light source optimized for photography

1. A COB (Chip On Board) type LED that emits light from a 

single plane is used so the problems observed with multi-

LED type light source, such as multi-shadow phenomenon

*2 

and light distribution irregularities, are eliminated.

2. The light source with high color rendering index of Ra80 

and color temperature of 5000K is used to reproduce highly 
natural colors.

3. Light distribution is 100º, which is wide enough for video 

recording.

4. The maximum light intensity is 2500 lm total flux.
5. A special condensing lens (standard accessory) can narrow 

the light distribution from 100º to 60º for brighter illumination 
of the target.

*2

The multi-shadow phenomenon refers to the shadows 

produced when a light with multiple LEDs is used.

• Simple operation

Only a couple of pushbuttons can control the switch ON/OFF, 
4-step brightness control and non-step brightness control.

• Various safety mechanisms

Multiple safety circuits

*3

 and an over-pressure valve is built in.

*3

High-temperature protection, over-charge protection, over-

discharge protection, over-current protection and short-
circuiting protection.

20

Summary of Contents for BM3400B









































Reviews: