8
16.
Refer to
Figure 2-9
. Feed bungee cord through hole in webbing and thread hook end through loop to attach to
webbing, Wrap bungee cord under and around canopy frame. Attach hook end to hole in canopy rib as shown.
Figure 2-9. Mounting the Bungee Hooks
17.
Once the canopy is installed, take special care in areas prone to high wind to anchor and stabilize the lift.
WARNING:
HIGH WINDS CAN TOPPLE A CANOPY-EQUIPPED LIFT THAT IS NOT PROPERLY
ANCHORED TO THE LAKE BOTTOM, ESPECIALLY WHEN THE BOAT IS NOT WEIGHING
DOWN THE LIFT. THIS CAN CAUSE EQUIPMENT DAMAGE AND/OR PERSONAL INJURY.
