6
Figure 2-5.
Mounting the End Caps, Plastic Caps, and Canopy Ribs
7.
Install plastic caps into the canopy frame end caps to prevent fabric abrasion.
8.
Install the canopy ribs by sliding them onto the canopy rib bushings.
9.
Refer to
Figure 2-6
. Assemble two end-center band (6) and one mid-center band (7) on top of the ribs with hardware
shown. This will provide a uniform lay of the fabric. At center band, splice connections that do not meet at a rib. Use
shorter hardware shown.
Figure 2-6.
Mounting the Center Bands
