Page 4 of 6
ASSEMBLY INSTRUCTIONS
LEYTON UPHOLSTERED CRIB TODDLER BED KIT
Remove Stationary Side Rail (B) from the
crib by carefully unscrew and remove the
4 Long bolts with spring washer on Left/
Right sides of the Stationary Side Rail (B)
using Allen Key (9).
STEP 1:
If mattress support is not in the lowest
position, loosen all tightened bolts from
side frames. Spread front of crib open
enough to remove mattress support (C),
and move it to the lowest position.
STEP 2:
A
4x
4x
B
A
9
Highest
level
Note:
The Mattress support (C)
must be at the lowest level for a
toddler bed.
Middle
level
Lowest
level
C
9
A
A
B
C
B
