PARTS INCLUDED
HARDWARE INCLUDED
ASSEMBLY INSTRUCTIONS
1.
Lay the
h
eadboard (A) on a flat surface
,
then attach the
l
egs (F) to the
bottom of the headboard by turning them manually. Repeat this step to
attach the legs to the
f
ootboard (C). See FIGURE 1.
2.
Place the headboard upright in the location you wish the bed to be in when
fully assembled.
3.
Secure the
t
hreaded
r
od (1) to the fixed nut on t
h
e headboard by simply
turning manually.
4.
Raise the
s
ide
r
ail (B) and place the rod to align with the holes on
the end of
the side rail.
Position
the side rail against the headboard so the
threaded
rods go through the holes. Insert
c
urved
w
asher (2),
l
ock
w
asher (3) and
h
ex
n
uts (4) on the threaded rod
,
then tighten the hex nuts
with
the w
rench
(5), as shown in FIGURE 2.
5.
Repeat the above procedure with the other side rail to attach it to the
headboard, and then repeat to connect side rails to the footboard.
A
B
C
D
E
F
[1]
[2]
[1]
[7]
[
1
]
[4]
HEADBOARD
SIDE RAILS
FOOTBOARD
BED SLATS
SUPPORT SLAT
LEGS
1
2
3
4
NO.
ITEM
DESCRIPTION
QTY.
Lock Washer
Allen Wrench
1 pc.
Wrench
Threaded Rod
Curved Washer
Hex Nut
1 pc.
8 pcs.
8 pcs.
8 pcs.
8 pcs.
5
6
FIGURE 1
FIGURE 2
Page 1 of 3
MAISON SHELTER
QUEEN
BED WITH FOOTBOARD INSTRUCTIONS
11/1/18
