Manual CE (SAGOMA_GB)
To delete, visualize each OUT OF ORDER and keep pressed
button 4
for some seconds.
12.7 EVA-DTS
The machine with proper hardware may be programmed to collect data following EVA-DTS
protocol. To proceed at the programming of these parameters, press
button 1
until the display
shows:
PROGRAMMING
EVA-DTS
Pressing
button 2
, the display shows:
Code ID 101
00
which identifies the number of the machine.
Pressing
button 2
, the display shows:
Code ID 102
00
which identifies the model of the machine.
Pressing
button 2
, the display shows:
Code ID 104
00
which identifies the location of the machine.
Pressing
button 2
, the display shows:
Address VIDTS
00
which identifies which peripherics should be contacted during data collection.
47/47