Rheem 95MSP series Installation Instructions Manual Download

Page: 5 / 100

Installation Checklist

REFER TO INSTALLATION INSTRUCTIONS

GAS SUPPLY

______ Correct pipe size (record size)

______ Correct supply pressure (during furnace operation)

______

(record pressure)

______ Manifold pressure (record upstream pressure)

______ No gas leaks

______ L.P. Kit Number (if applicable) (record kit number)

ELECTRICAL

______ 115 V.A.C. supply (Dedicated Circuit)

(record voltage)

______ Polarity observed

______ Furnace properly grounded

______ Correct wire size (record type and gauge)

FURNACE INSTALLATION

______ Correct clearance to combustibles (record

______

clearance)

______ Correct clearance for service (at front) (record

______

clearance)

DUCT STATIC PRESSURE

______ in. w.c. on heating speed (record static pressure)

______ in. w.c. on cooling speed (record static pressure)

______ Air temperature rise in heat (record air temperature

______

rise)

______ Air temperature rise in cool (record air temperature

______

rise)

CONDENSATE LINE

______ Trap filled with water

______ Vented

______ Sloped toward drain

______ Condensate drain line hoses connected and

______

clamped

______ Freeze protection (if necessary)

VENTING – DIRECT VENT

______ in. diameter – intake pipe (record diameter)

______ in. diameter – exhaust pipe (record diameter)

______ ft. of pipe – intake air (record length)

______ no. of elbows – intake air (record number of

______

elbows)

______ ft. of pipe – exhaust pipe (record length)

______ no. of elbows – exhaust pipe (record number of

______

elbows)

______ Exhaust Vent Temperature (record temperature)

TERMINATIONS – DIRECT VENT

VERTICAL

______ Intake – 12" [305mm] min. above roof/snow level

(record height above anticipated snow level)
or, in Canada, intake and exhaust vents conform
with CSA B149.1; Canadian Natural Gas and
Propane Installation Code

______ Correct relationship – exhaust to intake

HORIZONTAL/VERTICAL – CONCENTRIC (RXGY-E03A)

______ Intake – 12" [305mm] min. above roof/snow level

(record height above anticipated snow level)
or, in Canada, intake and exhaust vents conform
with CSA B149.1; Canadian Natural Gas and
Propane Installation Code

______ Exhaust sloped down toward furnace

______ Correct distances (horizontal and vertical) –

exhaust to intake

______ 12" [305mm] min. above grade/snow level (record

height above anticipated snow level) or, in
Canada, intake and exhaust vents conform
with CSA B149.1; Canadian Natural Gas and
Propane Installation Code

______ Above anticipated snow level (record maximum

______

anticipated snow level)

VENTING – NON-DIRECT VENT

______ in. diameter – exhaust pipe (record diameter)

______ ft. of pipe – exhaust (record length)

______ no. of elbows (record number of elbows)

TERMINATION – NON-DIRECT VENT

VERTICAL

______ 12" [305mm] min. above roof/snow level (record

height above anticipated snow level) or, in
Canada, intake and exhaust vents conform
with CSA B149.1; Canadian Natural Gas and
Propane Installation Code

HORIZONTAL – STANDARD

______ 12" [305mm] min. above grade/snow level (record

height above anticipated snow level) or, in
Canada, intake and exhaust vents conform
with CSA B149.1; Canadian Natural Gas and
Propane Installation Code

General Information

Installation Instructions remain with the furnace as a reference guide to the servicing contractor. We recommend
that performance and installation data be recorded for future reference on this sheet to meet service and warranty
obligations so that job site information is available when required.