1
2
Assemble Wheels to Frame
1 -
Axle Bracket
2 -
Serrated Flange
Nut
2
4
1
3
Attaching the handles
1 -
Clevis Pin
2 -
Handle
3 -
Nylon Washers
4 -
Hairpin Cotter
INSTALLING THE BATTERY
(ELECTRIC START
GENERATORS ONLY)
To avoid electric shock:
• ALWAYS connect the positive (+)
battery wire (red boot) f
i
rst when
connecting battery wires.
• ALWAYS disconnect the negative (-)
battery wire (black boot) f
i
rst
when disconnecting battery wires.
• NEVER connect the negative (-)
battery wire (black boot) to the
positive (+) post on the battery.
• NEVER connect the positive (+)
battery wire (red boot) to the negative
(-) post on the battery.
• NEVER touch both battery posts
simultaneously.
• NEVER place a metal tool across
both battery posts.
• ALWAYS use insulated or non-
conducting tools when installing the
battery.
WARNING:
The generator comes equipped with the
positive battery wire (red boot) already attached.
1. Verify the positive (+) battery wire (red boot) is
securely tightened to the positive (+) battery post.
Make sure boot is over battery post.
2. Carefully remove the protective wrapping around
the lug of the negative (-) battery wire (black boot).
3. Locate negative (-) cable attached to alternator
cable, remove tie and route to the negative (-)
battery post.
4. Pull back the black boot and securely attach the
negative (-) battery wire (black boot) to the negative
(-) battery post
.
Replace the
black boot so it
protects the wire lug and battery
post.
1
2
Attaching the Negative (-) Battery Wire (Black)
1 -
Positive (+)
Battery Cable
(Red)
2 -
Negative (-)
Battery Cable
(Black)
NOTICE
:
EN
Та
ше
в
-
Га
лв
ин
г
ОО
Д
www.tashev-galving.com
