Operative Instructions
12
Fig. 4.1
Fig. 4.2
Fig.4.3
- Handle the packaged machine only with forklift truck
or pallet trucks with forks (Fig. 4.1).
- Remove the “hat” container, extracting it from the
top (Fig. 4.2).
- Handle the machine with appropriate trolley. Lock the
machine on the trolley with a sturdy belt (Fig. 4.3)
Do not lift the machine by grasping it from the
protruding points, such as the control panel. They
may be damaged or detached. With some metal
components there is a danger of injury or cuts.
a
WARNING! Wear cut-resistant protective
gloves during manual transport and
positioning of the machine.
Fig. 5
A label is placed outside the packaging (Fig. 5) that
indicates:
A) Minimum and maximum temperature of the
storage environment;
B) Minimum and maximum humidity of the storage
environment;
C) Minimum and maximum pressure of the storage
environment;
D) “High” position indicators;
E) Glass indicating “Fragile” material;
F) Keep the packaging dry;
G) A maximum of one machine can be stacked;
H) Do not overturn the packaging with the machine
inside;
I) It is strictly forbidden to use hooks for handling the
packaged machine.
Inside the packaging, in addition to the machine and
the documentations, there are:
- the support, already inserted inside the machine with
the relative document of use;
- the straight drain pipe to connect the siphon to the
drain if wall-mounted or 2 curved drain pipes for
connection to the floor;
- 1 tank for each chemical required;
- 2 keys to open the panels.
At the time of handover, it is essential to check
immediately if all the material indicated on the
documents accompanying the device has been
delivered.
Summary of Contents for DVS
Page 40: ...Operative Instructions 40 Notes ...
Page 41: ...Operative Instructions 41 Notes ...
